I'm not getting something...
I've a HP laser 103w.
I can set it to print both sides, long edge and it goes off and prints the first half of the pages.
Then a pop up window shows how to manually remove the paper from the out "tray" and feed uit into the paper tray.
It then says "push the button" - but I can't see any button to press. All there is is the power button and pressing that seems to just kill the print job - leaving me with a half printed file.
Anyone any ideas? ive googled of course but i cant find anything specific to the 103w duplex printing, just other HP printers which bear no resemblance to it...
Got a credit card? use our Credit Card & Finance Calculators
Thanks to Wasron,jfgw,Rhyd6,eyeball08,Wondergirly, for Donating to support the site
How to duplex print on a HP laster 103w
-
- Lemon Half
- Posts: 5310
- Joined: November 4th, 2016, 12:04 pm
- Has thanked: 3295 times
- Been thanked: 1034 times
-
- Lemon Quarter
- Posts: 4179
- Joined: November 4th, 2016, 9:42 pm
- Has thanked: 1001 times
- Been thanked: 1855 times
Re: How to duplex print on a HP laster 103w
didds wrote:I've a HP laser 103w....
...It then says "push the button" - but I can't see any button to press....
... ive googled of course but i cant find anything specific to the 103w duplex printing, just other HP printers which bear no resemblance to it...
Here is the HP manual for the HP Laser 103, 107 and 108 series.
http://h10032.www1.hp.com/ctg/Manual/c06287229.pdf
On page 18 it shows the 'Control panel overview'. Apparently you should have a 'Resume/Cancel' button.
http://h10032.www1.hp.com/ctg/Manual/c0 ... .5.4676063HP wrote:3. Resume/Cancel....
Manual print
- Press this button to print the other side of all pages if you have selected Double-sided Printing (Manual) in your driver.
-
- Lemon Half
- Posts: 5310
- Joined: November 4th, 2016, 12:04 pm
- Has thanked: 3295 times
- Been thanked: 1034 times
-
- Lemon Half
- Posts: 5310
- Joined: November 4th, 2016, 12:04 pm
- Has thanked: 3295 times
- Been thanked: 1034 times
Re: How to duplex print on a HP laster 103w
FWIW its a 107w... mea culpa
same results (or lack of them ) however
same results (or lack of them ) however
-
- Lemon Half
- Posts: 5310
- Joined: November 4th, 2016, 12:04 pm
- Has thanked: 3295 times
- Been thanked: 1034 times
Re: How to duplex print on a HP laster 103w
In desperation I removed the printer completely from my system and reinstalled the drivers form the previously downloaded driver executable.
And of course it now works.
Go figure
stand down everybody!
And many thank Breelander (as ever) for finding the tiny tiny nuance Id missed when I had scoured the manual earlier !
And of course it now works.
Go figure
stand down everybody!
And many thank Breelander (as ever) for finding the tiny tiny nuance Id missed when I had scoured the manual earlier !
-
- Lemon Slice
- Posts: 333
- Joined: November 12th, 2016, 9:25 pm
- Has thanked: 566 times
- Been thanked: 125 times
Re: How to duplex print on a HP laster 103w
didds wrote:In desperation I removed the printer completely from my system and reinstalled the drivers form the previously downloaded driver executable.
And of course it now works.
Go figure
stand down everybody!
And many thank Breelander (as ever) for finding the tiny tiny nuance Id missed when I had scoured the manual earlier !
Ah yes! A variation on the old “turn it off and back on again” ploy.
“Remove and replace”.
Along with “uncheck and recheck” and “unplug and stick back in”.
All useful tools in the toolbag for when one has no flipping clue as to what is actually wrong but surprisingly often fruitful.
Return to “Technology - Computers, TV, Phones etc.”
Who is online
Users browsing this forum: No registered users and 21 guests