I need to find a waterproof filler to fill six screw holes in the laminate wall of my bathroom shower cubicle. The screws are currently holding a handrail to the shower wall and this has cracked and is starting to rust and stain the laminate.
I don't really want to use silicon sealant as it's a bit fiddly to apply. I would prefer something which can be applied and smoothed over by using a finger - a bit like normal plaster filler.
Any ideas?
Thanks
Karen
Got a credit card? use our Credit Card & Finance Calculators
Thanks to GrahamPlatt,gpadsa,Steffers0,lansdown,Wasron, for Donating to support the site
Shower wall sealant
-
- Lemon Pip
- Posts: 98
- Joined: November 8th, 2016, 12:36 pm
- Has thanked: 19 times
- Been thanked: 60 times
Re: Shower wall sealant
I have just found and ordered a sealing strip for our very old shower screen from this firm and happened to see they have a lot of grab rails that might start your search.
https://www.byretech.com
The sealants they have all seem to be silicone. Good luck in your search!
Mike
https://www.byretech.com
The sealants they have all seem to be silicone. Good luck in your search!
Mike
-
- Lemon Slice
- Posts: 969
- Joined: November 4th, 2016, 6:17 pm
- Has thanked: 112 times
- Been thanked: 271 times
Re: Shower wall sealant
Peltiq wrote:
I would prefer something which can be applied and smoothed over by using a finger - a bit like normal plaster filler.
Karen
You are incorrect. Silicon sealant can be applied and smoothed over using a finger and is in fact easier to do so than normal plaster filler as it takes longer for silicone to cure.
-
- 2 Lemon pips
- Posts: 128
- Joined: November 18th, 2016, 8:07 am
- Has thanked: 8 times
- Been thanked: 26 times
Re: Shower wall sealant
Mike88 wrote:Peltiq wrote:
I would prefer something which can be applied and smoothed over by using a finger - a bit like normal plaster filler.
Karen
You are incorrect. Silicon sealant can be applied and smoothed over using a finger and is in fact easier to do so than normal plaster filler as it takes longer for silicone to cure.
If you are confident that this will work, I will give it a go. Should I use a dry or wet finger? I have read that washing-up detergent helps!
K
-
- Lemon Slice
- Posts: 969
- Joined: November 4th, 2016, 6:17 pm
- Has thanked: 112 times
- Been thanked: 271 times
Re: Shower wall sealant
Peltiq wrote:Mike88 wrote:Peltiq wrote:
I would prefer something which can be applied and smoothed over by using a finger - a bit like normal plaster filler.
Karen
You are incorrect. Silicon sealant can be applied and smoothed over using a finger and is in fact easier to do so than normal plaster filler as it takes longer for silicone to cure.
If you are confident that this will work, I will give it a go. Should I use a dry or wet finger? I have read that washing-up detergent helps!
K
A wet finger. Have a clean rag handy and wipe your finger clean if you have to go over it again. As it happened I did a lot of siliconing yesterday.
-
- Lemon Quarter
- Posts: 2306
- Joined: November 4th, 2016, 4:20 pm
- Has thanked: 1908 times
- Been thanked: 871 times
Re: Shower wall sealant
Peltiq wrote:Mike88 wrote:Peltiq wrote:
I would prefer something which can be applied and smoothed over by using a finger - a bit like normal plaster filler.
Karen
You are incorrect. Silicon sealant can be applied and smoothed over using a finger and is in fact easier to do so than normal plaster filler as it takes longer for silicone to cure.
If you are confident that this will work, I will give it a go. Should I use a dry or wet finger? I have read that washing-up detergent helps!
K
Silicone won't stick to a wet surface so I would gun some silicone into each hole then smooth off with a damp finger. I don't think washing up liquid will make much difference in this scenario. Sprayed water with a touch of washing up liquid can help get a neat bead when siliconing along edges or joints. Again, it's sprayed after application. The idea being that as the bead is smoothed off, any spread will not stick to the tiles etc, where it's not needed
-
- Lemon Half
- Posts: 7383
- Joined: February 7th, 2017, 9:36 pm
- Has thanked: 10514 times
- Been thanked: 4659 times
Re: Shower wall sealant
Peltiq wrote:I need to find a waterproof filler to fill six screw holes in the laminate wall of my bathroom shower cubicle. The screws are currently holding a handrail to the shower wall and this has cracked and is starting to rust and stain the laminate.
I don't really want to use silicon sealant as it's a bit fiddly to apply. I would prefer something which can be applied and smoothed over by using a finger - a bit like normal plaster filler.
Any ideas?
Thanks
Karen
Karen,
I'll be there first thing in the morning (Sorry my bad)
There's a contradiction in your question. If you want waterproof, then silicone is really your best option. If you prefer to think of it as the "Gold Standard" in the building world for waterproof sealant in shower cubicles. I'm not sure if you're saying the handrail is damaged or the shower cubicle?
I'd suggest you replace the handrail if it's that which is damaged.
If you can a photograph would really be useful as I'm not entirely sure what your describing.
Failing which;
Is it a shower cubicle or a tiled shower area forming a cubicle using the walls of your home?
AiY
-
- 2 Lemon pips
- Posts: 128
- Joined: November 18th, 2016, 8:07 am
- Has thanked: 8 times
- Been thanked: 26 times
Re: Shower wall sealant
M\any thanks for all the advice.
I ended buying a tube of Unibond tile adhesive and grout and that seems to have done the job.
https://www.amazon.co.uk/UniBond-264363 ... N4DB9?th=1
I removed the 6 screws and rawlplugs which were holding the hand-rail to the wall and squirted a blob of the grout into the remaining holes. I left it for 24 hours to go off and hey presto!
As a bonus, the grey grout more or less matches the laminate shower wall.
I ended buying a tube of Unibond tile adhesive and grout and that seems to have done the job.
https://www.amazon.co.uk/UniBond-264363 ... N4DB9?th=1
I removed the 6 screws and rawlplugs which were holding the hand-rail to the wall and squirted a blob of the grout into the remaining holes. I left it for 24 hours to go off and hey presto!
As a bonus, the grey grout more or less matches the laminate shower wall.
Re: Shower wall sealant
Whilst the OP has resolved his issue, I should comment on Staffordian's reply:
Actually, using washing up liquid can cause the sealant to fail. I recommend watching Charlie DIYte's video on how to apply silicone sealant, in which he explains why:
https://www.youtube.com/watch?v=_DI4hfHM_Hg
I don't think washing up liquid will make much difference in this scenario. Sprayed water with a touch of washing up liquid can help get a neat bead when siliconing along edges or joints. Again, it's sprayed after application. The idea being that as the bead is smoothed off, any spread will not stick to the tiles etc, where it's not needed
Actually, using washing up liquid can cause the sealant to fail. I recommend watching Charlie DIYte's video on how to apply silicone sealant, in which he explains why:
https://www.youtube.com/watch?v=_DI4hfHM_Hg
Who is online
Users browsing this forum: No registered users and 3 guests