Got a credit card? use our Credit Card & Finance Calculators
Thanks to eyeball08,Wondergirly,bofh,johnstevens77,Bhoddhisatva, for Donating to support the site
Painting kitchen drawers and shelves
-
- Lemon Half
- Posts: 7981
- Joined: November 4th, 2016, 6:11 pm
- Has thanked: 987 times
- Been thanked: 3656 times
Painting kitchen drawers and shelves
For various reasons I'm considering giving my kitchen a "refresh" rather than complete overhaul. This will entail new doors and drawer-fronts, but re-using the existing carcases.
The shelf and drawer surfaces are the usual while melamine-covered chipboard, but getting tired and worn in places.
I was hoping to be able to give them a coat of white paint. It would need to be able to adhere to the melamine, and be tough enough to withstand the wear and tear these things get with things being thrown into drawers, scraped over shelves etc.
Any recommendations on preparation, type of primer, paint etc.?
Scott.
The shelf and drawer surfaces are the usual while melamine-covered chipboard, but getting tired and worn in places.
I was hoping to be able to give them a coat of white paint. It would need to be able to adhere to the melamine, and be tough enough to withstand the wear and tear these things get with things being thrown into drawers, scraped over shelves etc.
Any recommendations on preparation, type of primer, paint etc.?
Scott.
-
- Lemon Quarter
- Posts: 3766
- Joined: November 6th, 2016, 10:25 pm
- Has thanked: 1185 times
- Been thanked: 1975 times
Re: Painting kitchen drawers and shelves
One suggestion - don't bother. If you can chip or wear laminate, then paint won't last anything like as well. You can usually get replacement shelves pretty easily, or perhaps turn the existing ones over.
In days of old you used newspaper, wallpaper, or Fablon for protecting drawer inners, the former being a great source of interest for those clearing out the kitchens of elderly residents.
One thing to note with 'off the shelf' cupboard doors is that hinge spacing is not universal, so you will probably need to redrill the carcasses to match the hiinge recesses machined into the doors. If they're only slightly different it is a real PITA as the holes merge into each other. I would hope the custom door places will machine the doors to match your existing spacing.
Paul
In days of old you used newspaper, wallpaper, or Fablon for protecting drawer inners, the former being a great source of interest for those clearing out the kitchens of elderly residents.
One thing to note with 'off the shelf' cupboard doors is that hinge spacing is not universal, so you will probably need to redrill the carcasses to match the hiinge recesses machined into the doors. If they're only slightly different it is a real PITA as the holes merge into each other. I would hope the custom door places will machine the doors to match your existing spacing.
Paul
-
- Lemon Pip
- Posts: 85
- Joined: September 4th, 2020, 11:44 am
- Has thanked: 113 times
- Been thanked: 37 times
-
- Lemon Quarter
- Posts: 1560
- Joined: July 25th, 2018, 9:56 am
- Has thanked: 457 times
- Been thanked: 434 times
Re: Painting kitchen drawers and shelves
DrFfybes wrote:One suggestion - don't bother. If you can chip or wear laminate, then paint won't last anything like as well. You can usually get replacement shelves pretty easily, or perhaps turn the existing ones over.
In days of old you used newspaper, wallpaper, or Fablon for protecting drawer inners, the former being a great source of interest for those clearing out the kitchens of elderly residents.
One thing to note with 'off the shelf' cupboard doors is that hinge spacing is not universal, so you will probably need to redrill the carcasses to match the hiinge recesses machined into the doors. If they're only slightly different it is a real PITA as the holes merge into each other. I would hope the custom door places will machine the doors to match your existing spacing.
Paul
You can glue dowels into existing holes. Works quite well, I've done it, works out quite solid and strong
-
- Lemon Slice
- Posts: 387
- Joined: November 4th, 2016, 12:18 pm
- Has thanked: 351 times
- Been thanked: 201 times
Re: Painting kitchen drawers and shelves
In response to ideas about suitable primers, I have had excellent results using the Zinsser range of primers on previously glossed or varnished surfaces - I've used both Zinsser BIN and Zinsser Bulls Eye 1-2-3 primers. https://www.zinsseruk.com/product/
I believe they are both suitable for Melamine, but check this is correct.
BIN is shellac based, extremely quick drying and requires methylated spirits to clean the brushes. You have to work with it quickly as it dries so quick.
Bulls Eye is easier to use and is water based.
I believe they are both suitable for Melamine, but check this is correct.
BIN is shellac based, extremely quick drying and requires methylated spirits to clean the brushes. You have to work with it quickly as it dries so quick.
Bulls Eye is easier to use and is water based.
-
- Lemon Half
- Posts: 5815
- Joined: November 4th, 2016, 11:22 am
- Has thanked: 4168 times
- Been thanked: 2591 times
Re: Painting kitchen drawers and shelves
swill453 wrote:Any recommendations on preparation, type of primer, paint etc.?
The result will not be at all durable. I would give it all a really good clean and perhaps polish it with Solvol Autosol - yes, it's a chrome polish - and leave it at that.
Drawers in particular... do you really want your implements embellished with paint fragments...
But if you must waste your time... sand thoroughly with 100 grit then clean off with white spirit, using a brush to clean into any corners.
Then try Johnstone's Cupboard paint https://www.ebay.co.uk/itm/254505158611 which is designed to stick to plastic, and says it's self-priming.
V8
Re: Painting kitchen drawers and shelves
swill453 wrote:For various reasons I'm considering giving my kitchen a "refresh" rather than complete overhaul. This will entail new doors and drawer-fronts, but re-using the existing carcases.
The shelf and drawer surfaces are the usual while melamine-covered chipboard, but getting tired and worn in places.
I was hoping to be able to give them a coat of white paint. It would need to be able to adhere to the melamine, and be tough enough to withstand the wear and tear these things get with things being thrown into drawers, scraped over shelves etc.
Any recommendations on preparation, type of primer, paint etc.?
Scott.
The best primer to use is oil-based primer, or shellac-based primer. Don't use latex primer. Question: I need to repaint my cabinets. They have a clear coat on them.
Plus, I chose a latex satin paint, but you can paint furniture in any finish you like. Satin, semi-gloss, or gloss will give you more of a polished look – satin the least shiny – gloss the most shiny.
-
- Lemon Quarter
- Posts: 1040
- Joined: November 5th, 2016, 12:26 pm
- Has thanked: 215 times
- Been thanked: 205 times
Re: Painting kitchen drawers and shelves
I wouldn’t consider painting kitchen cabinet doors as unless you prepare them well and spray several coats the results will be of poor appearance and even then nowhere near laminate in durability.
Replacing doors and drawer fronts is quite affordable and easy with very modest diy skills. I’ve replaced ours in the kitchen and utility rooms and after several years they still look excellent on the original carcasses. Advertising is frowned on here but a few Google searches finds several suppliers and they will send you small sample doors at little cost (free if you then order) to see if you like the colour you’ve chosen. You need to measure the sizes accurately including the hinge spacing from the edges (not difficult but take a bit of care) and you can reuse your existing handles by drilling through the existing doors as a template. Various styles are available (plain, Quaker etc.) and a range of gloss and matt finishes.
Replacing doors and drawer fronts is quite affordable and easy with very modest diy skills. I’ve replaced ours in the kitchen and utility rooms and after several years they still look excellent on the original carcasses. Advertising is frowned on here but a few Google searches finds several suppliers and they will send you small sample doors at little cost (free if you then order) to see if you like the colour you’ve chosen. You need to measure the sizes accurately including the hinge spacing from the edges (not difficult but take a bit of care) and you can reuse your existing handles by drilling through the existing doors as a template. Various styles are available (plain, Quaker etc.) and a range of gloss and matt finishes.
-
- Lemon Slice
- Posts: 406
- Joined: November 4th, 2016, 10:52 pm
- Has thanked: 242 times
- Been thanked: 65 times
Re: Painting kitchen drawers and shelves
quelquod wrote:I wouldn’t consider painting kitchen cabinet doors as unless you prepare them well and spray several coats the results will be of poor appearance and even then nowhere near laminate in durability.
Replacing doors and drawer fronts is quite affordable and easy with very modest diy skills. I’ve replaced ours in the kitchen and utility rooms and after several years they still look excellent on the original carcasses. Advertising is frowned on here but a few Google searches finds several suppliers and they will send you small sample doors at little cost (free if you then order) to see if you like the colour you’ve chosen. You need to measure the sizes accurately including the hinge spacing from the edges (not difficult but take a bit of care) and you can reuse your existing handles by drilling through the existing doors as a template. Various styles are available (plain, Quaker etc.) and a range of gloss and matt finishes.
I tend to agree, although I expect paint tech may have improved a bit I recent years. At the end of the day the quality and durability of any paint finish is as much down to proper prep.
Interestingly, given my past experience of hand painted kitchen cabinets was in student dives, I found it amusing when some friends of ours bought a house with a bespoke kitchen fitted by the previous owners (several tens of thousands of £ worth), and one of the 'selling points' of this kitchen was that it was hand-painted (by 'craftsmen' of course...).
When the 'foil' wrap on ours started to peel, painting wasn't really an option, I just bought new doors, luckily the company still made the same range in various styles so they fitted straight on with no mods. Probably worth trying the paint if replacing the doors is a feasible backup option.
BH
Re: Painting kitchen drawers and shelves
Amilie wrote:swill453 wrote:For various reasons I'm considering giving my kitchen a "refresh" rather than complete overhaul. This will entail new doors and drawer-fronts, but re-using the existing carcases.
The shelf and drawer surfaces are the usual while melamine-covered chipboard, but getting tired and worn in places.
I was hoping to be able to give them a coat of white paint. It would need to be able to adhere to the melamine, and be tough enough to withstand the wear and tear these things get with things being thrown into drawers, scraped over shelves etc.
Any recommendations on preparation, type of primer, paint etc.?
Scott.
The best primer to use is oil-based primer, or shellac-based primer. Don't use latex primer. Question: I need to repaint my cabinets. They have a clear coat on them.
Plus, I chose a latex satin paint, but you can paint furniture in any finish you like. Satin, semi-gloss, or gloss will give you more of a polished look – satin the least shiny – gloss the most shiny.
-
- Lemon Slice
- Posts: 481
- Joined: May 11th, 2017, 8:33 pm
- Has thanked: 91 times
- Been thanked: 207 times
Re: Painting kitchen drawers and shelves
bionichamster wrote:When the 'foil' wrap on ours started to peel, painting wasn't really an option, I just bought new doors, luckily the company still made the same range in various styles so they fitted straight on with no mods. Probably worth trying the paint if replacing the doors is a feasible backup option.
I've just had a foil-wrap door go and a couple more showing signs of blowing. I decided to re-spray the one door using Rustoleum's Mode High Gloss paint thinking it would get near the high-gloss wrap finish.
Replacing the door wasn't an option. It was 17 years old and made to a Wickes size that no one else does. Wickes had a very limited range of doors, preferring to sell a new unit all boxed up with the door.
The wrap came off easily leaving a smooth mdf raised and fielded door. Two cans of primer and a can of high gloss gave me a finish that can only be described as under-whelming (and patchy).
Best advise I can give is a) don't try and match an existing door and b) don't bother with the Mode spray. A high-gloss brush applied paint will do a better job.
Re: Painting kitchen drawers and shelves
Amilie wrote:Amilie wrote:swill453 wrote:For various reasons I'm considering giving my kitchen a "refresh" rather than complete overhaul. This will entail new doors and drawer-fronts, but re-using the existing carcases.
The shelf and drawer surfaces are the usual while melamine-covered chipboard, but getting tired and worn in places.
I was hoping to be able to give them a coat of white paint. It would need to be able to adhere to the melamine, and be tough enough to withstand the wear and tear these things get with things being thrown into drawers, scraped over shelves etc.
Any recommendations on preparation, type of primer, paint etc.?
Scott.
The best primer to use is oil-based primer, or shellac-based primer. Don't use latex primer. Question: I need to repaint my cabinets. They have a clear coat on them.
Plus, I chose a latex satin paint, but you can paint furniture in any finish you like. Satin, semi-gloss, or gloss will give you more of a polished look – satin the least shiny – gloss the most shiny.
Who is online
Users browsing this forum: M0n1ter and 38 guests