Got a credit card? use our Credit Card & Finance Calculators
Thanks to johnstevens77,Bhoddhisatva,scotia,Anonymous,Cornytiv34, for Donating to support the site
More Mystery Items
-
- Lemon Slice
- Posts: 349
- Joined: November 23rd, 2016, 9:45 am
- Has thanked: 29 times
- Been thanked: 116 times
Re: More Mystery Items
I think the clinometer is used by placing the flat base on an inclined surface, and the arm adjusted until the bubble indicates it is level, the angle in degrees and minutes gives an accurate inclination (in the range 0 to 45 degrees) of the surface on which the instrument is resting. The surface would need to be very flat for the degree of accuracy to be of use, so I think that points to a metal surface, rather than say stone or wood. The instrument is fairly robust, looks like is was made for a workshop or similar environment.
The problem now is to think of an application that would need to sort of accuracy provided in a working environment. I think any sort of construction trade could be ruled out, the degree of accuracy provided would not be necessary. The maximum angle which can be measured is 45 degrees, it would have been possible to make the instrument capable of measuring larger angles, but this has not been done.
Having said all that I am still at a loss, still trying to think of a possible use!
The problem now is to think of an application that would need to sort of accuracy provided in a working environment. I think any sort of construction trade could be ruled out, the degree of accuracy provided would not be necessary. The maximum angle which can be measured is 45 degrees, it would have been possible to make the instrument capable of measuring larger angles, but this has not been done.
Having said all that I am still at a loss, still trying to think of a possible use!
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
jfgw wrote:My one is marked thus:
CLINOMETER, FIELD MARK IV No 811
TAYLOR, TAYOR & HOBSON LTD [Arrow symbol] 1915
That "Arrow symbol" sounds like the old 'War Department' etc. symbol.
https://en.wikipedia.org/wiki/Broad_arrow
https://en.wikipedia.org/wiki/War_Depar ... ed_Kingdom)
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
XFool wrote:That "Arrow symbol" sounds like the old 'War Department' etc. symbol.
https://en.wikipedia.org/wiki/Broad_arrow
That's the one.
-
- Lemon Quarter
- Posts: 3120
- Joined: November 4th, 2016, 11:12 am
- Has thanked: 3591 times
- Been thanked: 1509 times
Re: More Mystery Items
The clinometer would have been used for gun laying, would be my guess. The development of superior artillery was probably the major contributor to victory in WW1.
RC
RC
-
- Lemon Slice
- Posts: 349
- Joined: November 23rd, 2016, 9:45 am
- Has thanked: 29 times
- Been thanked: 116 times
Re: More Mystery Items
Gunnery, that explains why the maximum angle is 45 degrees. I did consider that application, but reasoned that guns would have had angular indication built in. Seems I was wrong!
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
malkymoo wrote:Gunnery, that explains why the maximum angle is 45 degrees.
Not if the gun was a howitzer! The > 45 degree calibrations will be on the other side of the device, as per the link I gave.
"Clinometer Field Mark VI No. A.221"
Noblet and Forrest 1941"
"Direction of Target" with arrow. "Use this Base for 0° - 45°"
"45° - 90° Target" with arrow
Circle segment graduated with 0 - 44 degrees on side, 45 - 89 degrees other side.
Arm graduated 0 - 60 minutes both sides
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
Here is the clinometer standing on its feet for angles greater than 45 degrees. You will also see the text that I photoshopped out of the original photograph.
Julian F. G. W.
Julian F. G. W.
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
Seven out of ten so far:
1. Flash bulb.
2. Vidicon tube.
3.
4.
5. Tile spacers for hexagonal tiles.
6.
7. Clinometer for gun laying.
8. Bush wrench.
9. Radiator bleed valve.
10. As the yellow label (on the other side) says, it's a "CRT DISCHARGE TOOL".
The remaining three have not had one guess between them!
Obviously, it is a disadvantage not being able to pick the objects up to examine them so I will pretend that I do not know what the remaining three are and give a brief description.
3. (The thing with wheels/rollers): The rollers spin freely. The spindle in the middle is telescopic and there is a spring which pushes the two ends apart. There is another detail which may be seen from the photograph.
4. (The two brass objects): The part with the smaller thread may be clicked in and out like the button on a ball-point pen.
6. (Two metal clips): One half of each clip has two points, presumably to grab whatever they are designed to hold. The other half of each clip has two recesses so, potentially, these clips could damage whatever they are gripping depending upon what it is made of. The smaller clip is weighted.
Start guessing and I might drop in a few more clues.
Julian F. G. W.
1. Flash bulb.
2. Vidicon tube.
3.
4.
5. Tile spacers for hexagonal tiles.
6.
7. Clinometer for gun laying.
8. Bush wrench.
9. Radiator bleed valve.
10. As the yellow label (on the other side) says, it's a "CRT DISCHARGE TOOL".
The remaining three have not had one guess between them!
Obviously, it is a disadvantage not being able to pick the objects up to examine them so I will pretend that I do not know what the remaining three are and give a brief description.
3. (The thing with wheels/rollers): The rollers spin freely. The spindle in the middle is telescopic and there is a spring which pushes the two ends apart. There is another detail which may be seen from the photograph.
4. (The two brass objects): The part with the smaller thread may be clicked in and out like the button on a ball-point pen.
6. (Two metal clips): One half of each clip has two points, presumably to grab whatever they are designed to hold. The other half of each clip has two recesses so, potentially, these clips could damage whatever they are gripping depending upon what it is made of. The smaller clip is weighted.
Start guessing and I might drop in a few more clues.
Julian F. G. W.
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
jfgw wrote:3. (The thing with wheels/rollers): The rollers spin freely. The spindle in the middle is telescopic and there is a spring which pushes the two ends apart. There is another detail which may be seen from the photograph.
4. (The two brass objects): The part with the smaller thread may be clicked in and out like the button on a ball-point pen.
6. (Two metal clips): One half of each clip has two points, presumably to grab whatever they are designed to hold. The other half of each clip has two recesses so, potentially, these clips could damage whatever they are gripping depending upon what it is made of. The smaller clip is weighted.
4. (Air? Steam?) Pressure release valves?
6. Clips from either end of an old fashioned barber's leather razor sharpening strop?
I'm still working on 3.
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
XFool wrote:4. (Air? Steam?) Pressure release valves?
Nothing to do with air or steam, and not any kind of pressure release valve.
XFool wrote:6. Clips from either end of an old fashioned barber's leather razor sharpening strop?
Not for a razor strop.
Keep the guesses coming!
Julian F. G. W.
-
- Lemon Quarter
- Posts: 4092
- Joined: November 4th, 2016, 9:24 am
- Has thanked: 3234 times
- Been thanked: 2827 times
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
kiloran wrote:3...1-way water valves?
--kiloran (clutching at straws)
Water is relevant but they are not one-way valves.
-
- Lemon Half
- Posts: 6381
- Joined: November 4th, 2016, 11:35 am
- Has thanked: 1880 times
- Been thanked: 2026 times
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
AleisterCrowley wrote:6: something to do with photo processing?
I see your thinking...
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
jfgw wrote:kiloran wrote:3...1-way water valves?
--kiloran (clutching at straws)
Water is relevant but they are not one-way valves.
Yeah. If it's made of brass, it must have something to do with water!
Anything to do with temperature?
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
AleisterCrowley wrote:6: something to do with photo processing?
Yes. What would they be used for?
XFool wrote:Anything to do with temperature?
Nothing to do with temperature.
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
jfgw wrote:AleisterCrowley wrote:6: something to do with photo processing?
Yes. What would they be used for?
Hanging up either rolls of developed film, or prints, to dry. Likely rolls of negatives given the bottom weighted clip - though could be to prevent prints curling on drying.
Are the clip 'points' spaced to 35mm film size sprocket holes?
-
- The full Lemon
- Posts: 12636
- Joined: November 8th, 2016, 7:21 pm
- Been thanked: 2608 times
Re: More Mystery Items
I can only imagine 3 being attached and detached to some other device or machine, via the centre hole. Hence used as a weighted roller to hold down something passing underneath, such as a roll of paper or something. Not another item from the photo processing industry?
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
XFool wrote:Hanging up either rolls of developed film, or prints, to dry. Likely rolls of negatives given the bottom weighted clip - though could be to prevent prints curling on drying.
They are for hanging rolls of developed film for drying. I think they may also have been used commercially for hanging film for processing in deep tanks but I have not found any reference except for one comment that the lead weights in one brand dissolved in C41 chemistry. I will check tonight whether the points line up with 35mm film sprocket holes. (I have some of a different brand with points that do.). Any damage would have been on the unexposed ends of the film.
Weights would not be needed for prints. Resin coated paper is stable and can be dried in racks. Fibre based paper curls when first wetted but soon goes floppy. (Fibre-based needs to go face-down in the developer to begin with otherwise the ends curl up out of the tray. You still need to hold the middle down with the tongs but that's easy. You can turn it face-up once it is soft.)
XFool wrote:I can only imagine 3 being attached and detached to some other device or machine, via the centre hole. Hence used as a weighted roller to hold down something passing underneath, such as a roll of paper or something. Not another item from the photo processing industry?
It is not a weight and has nothing to do with photography. The central spindle is not used as a roller. The hole is important.
Julian F. G. W.
-
- Lemon Quarter
- Posts: 2539
- Joined: November 4th, 2016, 3:36 pm
- Has thanked: 1097 times
- Been thanked: 1146 times
Re: More Mystery Items
jfgw wrote:I will check tonight whether the points line up with 35mm film sprocket holes.
The pointy bits are actually much too close to fit the sprocket holes.
The clips are marked "JOHNSONS OF HENDON", once a major supplier of darkroom and other photographic equipment and materials.
Julian F. G. W.
Return to “Games, Puzzles and Riddles”
Who is online
Users browsing this forum: No registered users and 11 guests